Publicité
APPLIANCE AND MATERIAL INFORMATION
The equipment includes:
Compressor unit - Model: P0905EM
A1 - Switch
A2 - Air intake
A3 - Air filter
A -
A4 - Nebuliser holder
A8 - Power supply unit
A9 - Cable with 12V cigarette lighter plug (CAR / CAMPER /
BOAT )
A10 - Battery
Nebuliser and accessories - Model: RF7-2
B1 -Connecting tube (compressor/nebuliser unit)
B2 - RF7 Dual Speed Plus Nebuliser
B2.1 - Lower part
B2.2 - Nozzle
B2.3 - Upper part
B -
B2.4 - Speed selector with valve
B3 - Mouthpiece with valve
B3.1 - Expiratory valve
B3.2 - Non-invasive nasal piece
B4 - Adult SoftTouch mask
B5 - Paediatric SoftTouch mask
C -
Carrying bag
IMPORTANT NOTE: There is an identification label on the packaging, remove it and affix it in
the spaces provided on page 2. When replacing the Nebuliser and accessories, perform the
same procedure.
OPERATING INSTRUCTIONS
Before each use, wash your hands thoroughly and clean your appliance as described in the sec-
tion "HYGIENE PREPARATION". During application, it is recommended to adequately protect
oneself from drips. This appliance is suitable for the administration of medicinal substances (so-
lutions and suspensions), for which aerosol administration is envisaged; such substances must
in any case be prescribed by a doctor. In the case of substances that are too dense, dilution with
suitable saline solution may be necessary, as prescribed by a doctor.
1) Operation with external power supply
1a) Operation with power supply unit
Plug the power supply unit (A8) into the mains socket. It must be positioned in
such a way that disconnection from the power grid is not difficult.
Insert the "L" plug of the power supply cable into the DC plug of
the device.
26
Information on materials
Polypropylene
Polypropylene +
Thermoplastic Elastomers
Publicité
