Télécharger Imprimer la page

FLAEM Wi.Neb go Notice D'utilisation page 24

Publicité

NEBULIZER TECHNICAL SPECIFICATIONS
Model:
RF7-2
RF7 Dual Speed Plus Nebuliser
Minimum drug capacity:
Maximum drug capacity:
COMPRESSOR UNIT SPECIFICATIONS
Model:
P0905EM
Power supply:
Absorption:
Max. pressure:
Air flow to compressor:
Noise level (at 1 m):
Operation:
Dimension:
TECHNICAL SPECIFICATIONS OF DEVICE
Model:
P0905EM combined with RF7-2
Operating pressure (with neb.):
Release:
(1)
MMAD:
(2)
Respirable fraction < 5 μm (FPF)
(2)
(1) Data collected according to Flaem's internal procedure.
(2) In vitro characterisation performed by TÜV Rheinland Italia S.r.l. in cooperation with the University of Parma. More
details are available on request.
APPLIED PARTS
Type BF applied parts are:
Weight:
ELECTRICAL CHARACTERISTICS OF THE POWER SUPPLY UNIT
Model: UME318-1215
Input (primary)
Output (secondary)
TECHNICAL SPECIFICATIONS OF THE 12 VDC CIGARETTE LIGHTER SOCKET CABLE
The cigarette lighter cable is equipped with a T250V 3A safety fuse.
TECHNICAL FEATURES OF THE REMOVABLE BATTERY
Type:
Autonomy with new battery at full charge:
Possibility of recharging:
Minimum charging time:
2 ml
8 ml
12V DC
1.25 A
1.7 bar approx.
14 l/min approx
52 dB (A) approx
30 minutes ON - 30 minutes OFF
13(L) x 9.5(D) x 5.5(H) cm
0.75 bar.
0.42 ml/min approx.
:
patient accessories (B3, B3.2, B4, B5)
0.545 Kg
100-240V 50-60Hz
DC 12V 1.5A
Li-ion 7.4V 2200mA
approx. 45 minutes (at a temperature of approx.
25°C)
with power supply unit or cable with plug for
cigarette lighter socket supplied with the device
approximately 2 hours
Speed selector B2.4
in pos Max
2.44 μm
80.7%
24
in pos Min
0.18 ml/min approx.
2.95 μm
74.7%

Publicité

loading