Publicité
EN
Back supports support damaged tissue structures (bones, ligaments and car-
tilage). At the same time, the compression effect supports the retaining func-
tion of the local ligament and muscle apparatus, thus relieving the spine. The
specially developed nodule pad supports the intercellular metabolism with its
intermittent massage effect via increased circulation.
The Generation Back Support was developed for patients who require a sup-
port which is easy to put on, is very comfortable to wear and has a wide area
of application.
Instructions for use:
When you receive your BORT Generation Back Support, the front fastener is
closed. Open it fully.
The pad which is split into two in the back area must be positioned with the
wider part of the pad in the direction of the head. Place both pads respec-
tively on the outer edge of the support cover.
Place the back support around the abdomen and close the BORT Generation
Back Support applying very little force, using the attached hand straps.
In order to close the BORT Generation Back Support fully, slip it into the hand
straps and pull the pulleys forwards evenly, applying very little force.
Following this, attach the hand straps using the micro Velcro provided. Ob-
serve here that the patient still feels good and is not strangulated. Within the
course of this fitting process, the BORT Generation Back Support is fully fitted
to the anatomy of the body and interlocks.
If the lower part of the support ends with the hip-bend when sitting, the sup-
port is correctly positioned.
To take off the support, detach the Velcro on the pulley hand straps and then
open the front fastener.
4
© Copyright Gebrauchs.info
Publicité
