Publicité
FEATURES
CONTROL PANEL
•
When the power is switched on, the unit will beep three times and be in standby mode.
The unit will automatically begin preheating and all available functions on the display will
light. (NOTE: If the milk reservoir is not on the unit, only the Single and Double Espresso
buttons will display.)
•
When you make your drink selection, only that button will remain illuminated, and it will
blink during the remaining preheating time. (Do not press the button again or you will
cancel your selection.)
•
Your selected drink button will turn solid when preheating has fi nished and the brew drink
cycle has begun.
•
When the brew cycle is complete, the unit will beep three times; all buttons will light up and
the unit will return to standby mode. If no longer using the espresso machine, you may wish
to turn it off .
•
After 20 minutes of no action, the unit will go into sleep mode, and just the CLEAN icon
(not the text) will be lit. Press the CLEAN icon to wake the unit up.
•
When the FROTH button is pressed, the froth function will run for 30 seconds. (All other
function lights will turn off .) You can end frothing before 30 seconds by pressing the
FROTH button again.
9
Publicité
