Publicité
OPERATING INSTRUCTIONS
HOW TO MAKE A LATTE
A latte is a larger coffee drink made with mostly steamed milk and a little espresso. When
using the latte presets, there is no need to manually froth the milk; it will occur automatically.
1.
Make sure the unit is plugged in.
2. Turn the unit on using the power switch located on its side.
3. Fill the water reservoir as directed on p. 13.
4. Fill the milk reservoir with milk to between the MIN and MAX lines and insert it into
the unit. (If the milk reservoir is not on the unit, the latte function will not work.)
5. Set the froth strength to Standard.
6. Place a large heatproof cup or mug on the metal coaster over the drip tray.
NOTE: Be sure to use a large mug, especially with a double latte, which can yield
as much as 296 ml (10 fl oz).
7.
Use the silver froth dispensing tube lever to position the froth dispensing tube over
the cup.
8. Fill the portafilter with ground coffee and attach it to the brew head as directed on
pp. 14–15.
9. Choose to brew a single or double latte by pressing the appropriate button. The button
will blink to signify the unit is preheating. The button will turn solid during the brew cycle.
When brewing is complete, the unit will beep three times, and your latte will be ready
to enjoy.
18
Publicité
