Publicité
OPERATING INSTRUCTIONS
HOW TO PLACE THE PORTAFILTER ON THE BREW HEAD
1.
Position the portafilter underneath the brew head with its handle facing to the left.
2. With one hand on top of the unit to steady it, insert the portafilter up into the brew
head, lining up the handle with the open lock icon on the unit.
3. Slowly turn the handle to the right until resistance is felt and the handle is aligned with the
locked icon on the unit; the handle will be at an approximately 90° angle to the machine.
CAUTION: To avoid possible burns from hot steam and water or damages to the unit, never
remove the water reservoir or the portafilter while brewing or frothing. If you intend to make
a second cup, be sure the unit is in standby mode—all buttons will be lit and solid—before
removing or inserting portafilter. If you need to add more water or milk to the reservoirs,
switch off the unit by pressing the button on the side of the unit.
1.
2.
3.
15
Publicité
