Krüger & Matz KM1808 Mode D'emploi page 45

Owner's manual
6. Press the / buttons to select "TMR ON" or "TMR OFF" to enable the timer or to
disable the time, and then press the TIMER/SLEEP button on the remote control
to confirm.
Press the TIMER/SLEEP button on the remote control to deactivate or activate the
alarm.
Note:
• Each enabled state will be cleared if a button is not pressed within 15 seconds.
• When the alarm rings, press the button on the remote control or on the unit.
The alarm stops but the alarm settings remain.
SETTING ADJUSTMENTS
Most settings and adjustments are required to be set when you first use the unit.
Settings adjustment is available after connecting this device to TV set via hDMI cable.
Press the SETUP button to access or exit system setup menu.
Press the / ,
P OW ER R E SUM E
SC R EE N SAV E R
H D R e s o lut io n
Aspe c t R atio
PA S SWO R D
R ATI NG
DEFAULT
TV SySTEM AUTO: For TV that is compatible with both PAL and NTSc.
NTSc: For TV with NTSc color system.
PAL: For TV with PAL color system.
POWER ON: Select this to make last memory function available for DISc.
RESUME OFF: Select this to make last memory function invalid.
ScREEN SAVER ON: The screen saver starts up if nothing is played back and no
OFF: The screen saver does not start up.
hD Resolution The resolution options include AUTO, 480i/576i, 480p/576p,720p, 1080i,
1080p.
Note: If no display appears on the TV screen due to unsupported
/ buttons and press the ENTER button confirm selection
O sd La n g ua ge
Audio
S u bt itl e
D V D M e n u
HDMI CEC
operations are performed for 4 minutes.
resolution, reconnect any available interlace video output to your
isplay and re-adjust the resolution settings to 480p/576p.
HDMI AU DI O
45