General Operation; Setting The Clock - Krüger & Matz KM1808 Mode D'emploi

Owner's manual
Connecting the AC Power Cable
Insert the Ac Power cable into a wall outlet, then your unit is ready to use.
Caution:
• Be sure to unplug the power plug from the outlet when the unit is not in use for
an extended period of time.
• Ensure that the power supply voltage corresponds to the voltage printed on the
back or the underside of the unit.

GENERAL OPERATION

Powering ON/OFF
When you insert the Ac power cable into a wall outlet, the unit will be in standby mode.
• Press the STANDBy button to switch the unit on.
• Press the STANDBy button to switch the unit back to standby mode.
Disconnect the mains plug from the mains socket if you want to switch the unit off
completely.
If there is no signal input under the DISc, USB, BT (Bluetooth), ARc, cOAXIAL,
OPTICAL or AUX mode, the unit will automatically switch off within 15 minutes.

SETTING THE CLOCK

Synchronization of the Clock
Note: by default, time is synchronized with RDS.
1. When in STANDBy mode, press and hold the MENU button on the remote
control to synchronise the clock.
2. Press the / buttons on the remote to switch the clock synchronization modes:
• RDS Only synchronize with the RDS radio station.
• OFF Turn off the clock synchronization function, only adjust the clock
manually.
3. Then press the ENTER button on the remote control to confirm.
35