Presetting Equalizer; Changing The Front Panel Darkness; Dab Radio Operation - Krüger & Matz KM1808 Mode D'emploi

Owner's manual

Presetting Equalizer

you can adjust the sound reproduced simply by choosing from 5 preset equalizers.
Press the EQ button repeatedly to scroll through the following options:
FLAT > POP > cLASSIc > ROck > jAzz (looped)

Changing the Front Panel Darkness

To dim or brighten the display, press the DIMMER button repeatedly on the remote
control to the desired brightness.
PLAY FROM ExTERNAL AUDIO DEVICES
1. Ensure that the unit is connected to the TV or audio device.
2. While in ON mode, press the
remote control repeatedly to select the OPTIcAL, cOAXIAL, hDMI ARc mode.
3. Operate your audio device directly for playback features.
4. Press the VOL +/– buttons to adjust the volume to your desired level.
In the OPTIcAL, cOAXIAL, ARc mode, if there is no sound output, ensure the
audio setting of the input source is set to PcM mode.

DAB RADIO OPERATION

Caution:
• Make sure that you have correctly connected and fully extended the antenna.
• you can program a maximum of 20 DAB radio stations.
To listen to the tuned stations press the
buttons, you will skip to the previous or next stored station (including primary and
secondary station). The unit will display the station name.
1. Press the
repeatedly to select DAB radio.
2. Press the MENU button on the remote control to display the DAB menu. Press the
buttons to select Full scan. Press the ENTER button to confirm.
Auto Scan
The auto scan will search for all DAB Band III channels. After the scan has finished,
the first alphanumerically found station will be automatically selected.
1. Press the MENU button on the remote control to enter the DAB menu. Then
press the /
the remote control to confirm. The display will show "SCAN..."that indicates the
progress of the scan and the amount of stations that have been found so far.
• Alternatively directly press and hold the PROG button on the remote control
to perform a full scan.
button on the unit or the SOURcE button on the
button on the unit or the SOURcE button on the remote control
buttons to select the "FULL ScAN". Press the ENTER button on
/ buttons. Each time you press the /
/
37