Citizen CH-453 Manuel D'instructions page 16

5
[Manual pressurization]
• If your systolic blood pressure is expected to exceed
• Keep "START/STOP" switch held pressed until
• After taking the blood pressure measurement, pressing the "START/STOP" switch
00̲CH453̲ACN̲all.indb Eng-16 00̲CH453̲ACN̲all.indb Eng-16
MEASURING YOUR BLOOD PRESSURE
Finishing measurement.
START/STOP Switch
200 mmHg, use Manual Pressurization when taking
a measurement.
the pressure value you want to stop pressurization
is reached (approximately 40 mmHg higher
than the Systolic blood pressure). You can stop
pressurization by the unit by releasing the switch at
the aforementioned value is reached.
The upper pressure limit is 280 mmHg
AUTOMATIC POWER OFF FEATURE
will turn the monitor off. However, if you do not press the switch, the monitor's
Auto OFF function will automatically turn the monitor off after 3 minutes.
• Press the "START/STOP" switch to
turn the monitor off.
* When you want to stop measurement,
press the "START/STOP" switch. The
cuff is deflated and measurement
stops.
- -
Eng 16
START/STOP Switch
2012/09/19 10:57:23 2012/09/19 10:57:23