Publicité
06 - CLEANING, CARE AND MAINTENANCE
Attention! The general safety conditions must be observed during maintenance and
care. To ensure trouble-free operation of the heater, the unit should be cleaned regu-
larly.
The following procedure is recommended for this:
1. Disconnect the power plug and allow the unit to cool down completely.
2. To keep the heater clean, the outer casing can be cleaned with a soft, damp cloth.
You can use a mild detergent if necessary. After cleaning, dry the unit with a soft
cloth.
3. DO NOT use alcohol, gasoline, abrasive powder, furniture polish or rough brushes
to clean the heater. This may cause damage or deterioration to the surface of the
heater.
4. Wait until the heater is completely dry before use.
STORAGE
If the heater will not be used for an extended period of time, store it in a cool, dry place
when not in use. To avoid dust and dirt accumulation, use the original packaging to re-
pack the unit.
05 - CONFORMITY / DISPOSAL
Warranty
All products are checked from our company before the delivery. In case that there is a
lack on your product, please contact the vendor. Please bring your proof of purchase for
guarantees. Please save the packaging materials of the unit.
Disposal
Please remove the heater properly. You can bring the product to any specialist dealer fort
he removal.
Technical changes
Technical changes in technique and design are possible.
CE declaration of Conformity
This device complies with the following standards
LVD
EN 60335-1:2012 + AC:2014 + A11:2014 +
A13:2017 + A1:2019 + A2:2019 + A14:2019
EN 60335-2-30:2009 + Cor.:2010 + A11:2012 + A1:2020
EN 62233:2008
LVD
2014/35/EU
EMC
2014/30/EU
RoHS 2015/863/EU
WEEE 2012/19/EU
EN
82
Publicité
