Publicité
MPEG Out
This player is capable of outputting the MPEG digital
bitstream. When the player is connected to an AV component
that has a built-in MPEG decoder, select the [MPEG] setting.
Otherwise, select [MPEG 3 3 3 3 3 PCM] to convert the digital signal
to the PCM signal, the digital signal output from a CD.
Audio1
Audio2
Video
Language
Dolby Digital Out –
Dolby Digital
DTS Out – Off
96kHz PCM Out – 96kHz 3 48kHz
MPEG Out
MPEG
MPEG
Change MPEG audio output mode
Move
Settings: MPEG
MPEG 3 3 3 3 3 PCM*
Digital Out
Depending on your preferences and the type of connections
made, you may opt not to have the digital audio signal output
at all. When this setting is set to [Off] there is no signal output
from the digital audio output jacks.
Make changes to the [Digital Out] setting in the Setup screen
Audio 1 menu in the [Expert] menu mode (page 23).
Audio1
Audio2
Video
Language
Dolby Digital Out –
Dolby Digital
DTS Out –
Off
96kHz PCM Out – 96kHz>48kHz
MPEG Out – MPEG 3 PCM
Digital Out
On
Off
Move
Settings: On (Digital bitstream is output)*
Off (Digital bitstream is not output)
General
3 PCM
SETUP
Exit
*
Factory setting
General
SETUP
Exit
* Factory setting
ENGLISH
Adjusting the Dynamic Range
of the Audio Soundtrack
Audio DRC stands for Audio Dynamic Range Compression.
When Audio DRC is on, soft sounds such as dialog can be
heard more clearly without making loud sounds even louder.
Select from three levels of compression depending on how
much effect you want. When Audio DRC is set to [Off], there
is no effect on the audio source.
Make changes to the [Audio DRC] setting in the Setup
screen Audio 2 menu.
Audio1
Audio2
Video
Language
Audio DRC
High
Medium
Low
Off
Dynamic playback at low volume
Move
Settings: High
(maximum compression of audio source)
Medium
(moderate compression of audio source)
Low
(very little compression of audio source)
Off*
Note
Audio DRC is only effective with Dolby Digital audio sources.
– DVD
General
SETUP
Exit
*
Factory setting
25
Publicité
