Publicité
ENGLISH
Getting Started
Using Your
DVD Player
Playing DVDs, Video CDs
and CDs
– DVD/Video CD/CD
Before you can start to enjoy the digital audio and video on
DVDs, be sure that you have either performed the Setup
Navigator procedure described in the previous section or
made the necessary settings in the Setup screen menus as
outlined in the next section to set up the player to correspond
to your home system. Having made these settings, you are
now ready to start using the player to enjoy DVDs, Video
CDs, and CDs.
OPEN/CLOSE
2
VIDEO ON/OFF
1
4
7
T-C
TOP
MENU
RETURN
ANGLE
PROGRAM
SETUP
REMOTE CONTROLLER
1
3
2
DVD PLAYER DV7110
OPEN/CLOSE
V I D E O
STANDBY
POWER
ON/OFF
1
DIGITAL OUT
18
A-B
REPEAT
RANDOM
2
3
5
6
8
9
+10
CLEAR
0
MENU
5
ENTER
4
SUBTITLE
AUDIO
LAST
OSD
MEMORY
CONDITION
DIMMER
MEMORY
RC7010DV
4
STOP
PLAY
REPEAT
A-B
REPEAT
SHUFFLE
SVCD
SCAN
CHAPTER
TITLE
TRACK
TITLE
DTS
CHAPTER
TRACK
PBC
FTS
TOTAL
TRACK
TIME
FL OFF
PAUSE
LEVEL
PHONES
DIMMER
VIDEO OFF
OSD
-
+
1
Press POWER on the front panel.
2
Press OPEN/CLOSE.
The disc tray comes out.
3
Load a disc.
Load a disc with the label side facing up, using the disc
tray guide to align the disc.
4
Press PLAY 3 3 3 3 3 .
• The disc tray closes, and playback begins.
• Depending on the disc, a menu may be displayed.
If a menu is displayed, proceed to step 5.
5
Select the item you want to view.
• When a DVD is loaded:
Select the item with the cursor buttons (2/3/5/ ) or
the number buttons then press ENTER.
• When a Video CD is loaded:
Use the number buttons to select the item.
Notes
• Noise is output if you make digital audio connections to a
receiver or amplifier that does not have a built-in decoder. Check
that the digital audio output format selected in the
Audio 1 menu corresponds to the audio components you have
made connections to (page 24-25).
• The TV screen size is factory set to present the wide screen
format (16:9 aspect ratio). If you have a standard TV screen (4:3
aspect ratio), this setting can be changed to match your TV
screen size in the Video menu (page 26).
When an operation is prohibited
There are times when you are using the player and attempt to
perform an operation, but for some reason it cannot be performed.
When this occurs, one of the two following icons appears on the
screen.
The operation is prohibited by the player.
The operation is prohibited by the programming on
the disc.
Publicité
