Publicité
Setting digital audio connections to an
AV amplifier or decoder
The [Digital Jack] screen establishes whether digital
connections have been made to an AV amplifier, receiver, or
external decoder. As there are numerous options available,
please refer to the instructions supplied with the component
the player is connected to determine what digital audio
formats can be decoded. If you have made no digital
connections, select [Not Connected].
Audio1 Audio2
Video
Language
Setup Navigator
Dolby Digital
Dolby Digital/DTS
Amp Connection
Dolby Digital/MPEG
Digital Jack
Dolby D/DTS/MPEG
PCM
Not Connected
Move
Select
ENTER
Settings: Dolby Digital*
Dolby Digital/DTS
Dolby Digital/MPEG
Dolby D/DTS/MPEG
PCM
Not Connected
Setting compatibility with 96 kHz
output
The [96 kHz PCM Audio] screen establishes whether or not
the AV component the player is connected to is capable of
processing an audio signal with a sampling rate of 96 kHz.
This screen only appears if connections have been made to
an external AV component as determined in previous
screens.
Audio1 Audio2
Video
Language
Setup Navigator
Amp Connection
No
96 kHz PCM Audio
Yes
Don't Know
Move
Select
ENTER
Settings: No*
Select if the connected AV component cannot
process an audio signal with a sampling rate of 96
kHz.
Yes
Select if the connected AV component can
process an audio signal with a sampling rate of 96
kHz.
Don't Know
Select if you are uncertain whether the connected
AV component can process an audio signal with a
sampling rate of 96 kHz.
General
Exit
SETUP
* Factory setting
General
Exit
SETUP
* Factory setting
ENGLISH
Confirming the settings
The [Exit Setup Navigator] is the final screen in the Setup
Navigator.
Audio1 Audio2
Video
Language
Setup Navigator
Save Changes
Exit Setup Navigator
Delete Changes
Start Again
Move
Select
ENTER
Settings: Save Changes*
Select to have the player make all of the
necessary audio, video and language settings
automatically.
Delete Changes
Select to exit the Setup Navigator without
changing any of the system settings.
Start Again
Select to return to the [OSD Language] screen of
the Setup Navigator and do the settings again.
To exit the Setup screen
When you have completed setting up the player using the
Setup Navigator or if you exit the Setup Navigator, the Setup
screen General menu appears. Press SETUP to close the
Setup screen.
To change other player settings in the Setup
screen menus
The procedure for changing the settings in the Setup screen
menus is described on page 22.
General
Exit
SETUP
* Factory setting
17
Publicité
