Publicité
Audio Connections
This player features two digital (optical and coaxial) and also
analog audio output formats.
Digital Audio Connections:
You can enjoy the digital audio recorded on DVD discs from
both optical digital and coaxial digital output jacks.
When making digital audio connections, do not make
connections from both the coaxial and optical digital
outputs to the same component.
When a DVD recorded in Dolby Digital, DTS, or MPEG is
loaded, noise will be output if you have made connections via
the digital audio jacks to a receiver or amplifier that cannot
decode a Dolby Digital, DTS, or MPEG digital bitstream. In
this case, be sure to set up the Setup Navigator audio
settings to best reflect the type of system you are using (page
17). Additionally, the digital audio settings can be adjusted
manually in the Setup screen Audio 1 menu (page 24-25).
DIGITAL OUT (Optical)
The digital signal is transmitted as light pulses through a
fiber-optic cable.
• Use to connect to an AV amplifier or receiver with built-in
Dolby Digital, DTS, or MPEG decoder.
• Use a fiber-optic cable (not supplied) to connect the
DIGITAL OUT OPT (digital optical output) on the player to
the digital optical input on an AV amplifier or receiver.
Y
C
B
L
1
/P
B
RC-5/6 RS-232C
RS-232C CONTROL
RS-232C
C
R
R
2
/P
R
DVD 1
DVD 2
INTERNAL
VIDEO/S2
2
1
VIDEO
S2
COMPONENT
COAXIAL
CODE
EXTERNAL
COMPONENT
REMOTE
VIDEO
AUDIO
VIDEO
CONTROL
OUTPUT
OUTPUT
OUTPUT
DIGITAL IN
AV amplifier or receiver with
built-in Dolby Digital, DTS, or
MPEG decoder
IN
OUT
OPTICAL
DIGITAL
REMOTE
OUTPUT
CONTROL
OPTICAL
ENGLISH
DIGITAL OUT (Coaxial)
The digital signal is transmitted electronically through a
coaxial cable.
• Use to connect to an AV amplifier or receiver with built-in
Dolby Digital, DTS, or MPEG decoder.
• Use a coaxial cable (not supplied) to connect the DIGITAL
OUT (coaxial digital output) on the player to the coaxial
digital input on an AV amplifier or receiver.
Y
C
B
L
1
/P
B
RC-5/6 RS-232C
RS-232C
RS-232C CONTROL
C
R
R
2
/P
R
DVD 1
DVD 2
INTERNAL
VIDEO/S2
2
1
VIDEO
S2
COMPONENT
CODE
EXTERNAL
COMPONENT
REMOTE
VIDEO
AUDIO
VIDEO
CONTROL
OUTPUT
OUTPUT
OUTPUT
DIGITAL IN
AV amplifier or receiver with
built-in Dolby Digital, DTS, or
MPEG decoder
Analog Audio Connection:
AUDIO OUT
• Make analog audio connections to a stereo amplifier or
receiver.
• Analog audio connections can also be made to a TV or
monitor with stereo input jacks.
• Use the supplied audio cord to connect the AUDIO OUT
on the player to the audio input on the stereo amplifier or
receiver.
• When making analog audio connections, be sure to match
the color of the plugs with the color of the jacks (red and
white).
Y
C
B
IN
L
1
/P
B
RC-5/6 RS-232C
RS-232C
RS-232C CONTROL
C
R
OUT
R
2
/P
R
DVD 1
DVD 2
INTERNAL
VIDEO/S2
2
1
VIDEO
S2
COMPONENT
COAXIAL
OPTICAL
CODE
EXTERNAL
COMPONENT
REMOTE
VIDEO
AUDIO
VIDEO
DIGITAL
CONTROL
OUTPUT
OUTPUT
OUTPUT
OUTPUT
L
R
1
(red)
(white)
Stereo amplifier or receiver
IN
OUT
COAXIAL
OPTICAL
DIGITAL
REMOTE
OUTPUT
CONTROL
COAXIAL
REMOTE
CONTROL
AUDIO IN
R
L
(white)
(red)
13
Publicité
