Publicité
If the device will not be used for an extended time
All manuals and user guides at all-guides.com
period, remove the battery and store the device in a
dry and dust-free area. Improper use of the battery
can lead to explosion or leakage.
If the battery leaks, avoid contact with skin, eyes
and mucous membranes. Use gloves. If you are
exposed to battery acid, rinse the affected areas
with plenty of clean water and immediately seek
medical attention. Remove discharged batteries
from the device as they present an increased risk of
leakage.
Time setting
Carefully pull the crown out all the way. Turn the
crown clockwise or counter clockwise to set the
time. Press the crown back to the case to complete
the setting.
Shortening the band
2-LD4557-1+2
Your watch band is equipped with an additional link
with a fastener to simplify band shortening. Open
the fastener of the band and of the additional link.
Remove the additional link and re-close the fastener
of the band.
Shortening the band 2-LD4557-2
Shortening of the strap can also be achieved by
removing segments. Open the buckle and place the
wristwatch on a soft surface with the dial facing
downward. The segments that can be removed are
marked with an arrow. Push a pointed tool into the
opening on the side of the band and push the bolt
out of the band in the direction of the arrow. Pull out
the bolt (using pliers if necessary). The band can
now be disassembled. The strap can now be
disassembled. Remove as many segments as
necessary in the described fashion and reassemble
the strap by pushing the bolt inwards in the opposite
direction of the arrow.
Cleaning instructions
Clean the wristwatch with a soft, dry and lint-free
cloth. A glasses cleaning cloth is ideal.
Replacement of battery
(SR626SW)
Battery replacements must be performed by an
expert to avoid damaging the case or gaskets.
- 3 -
Publicité
