Publicité
MAILA® APP
Download the MAILA® app, which is available free of charge in the App Store, onto your tablet and install it.
Activate Bluetooth in the system settings of the active MAILA® components. Also activate Bluetooth in the
system settings of your tablet and start the MAILA® app. The MAILA® components with activated Bluetooth
within range are now automatically displayed in the MAILA® app after a short time.
FIRMWARE UPDATE
Use the MAILA® app to check whether a new firmware is available for your unit. Start the update
procedure via MAILA® App. Make sure that there is a stable wireless connection between the device
and the tablet and do not switch off the device or the tablet until the update procedure is complete.
Cancelling the update procedure may cause the unit to malfunction. The MAILA® app for iPadOS is
available free of charge in the App Store.
INDICATION-LED
The speaker column has a white indicator LED on the front behind
the front grille. This can be activated for easy identification of the
speaker column using the MAILA® app. The MAILA® app for iPadOS
is available free of charge in the App Store.
OPTIONAL ACCESSORIES
LDMAILAFC2 (Flightcase for 4x SAT, 1x COL, 1x EasyMount+®)
LDMAILATMB (EasyMount+® flying bracket)
CARE, MAINTENANCE AND REPAIR
To ensure the proper functioning of the unit in the long term, it must be regularly maintained and
serviced as required. The need for care and maintenance depends on the intensity of use and the
environment.
We generally recommend a visual inspection before each commissioning. Furthermore, we recommend
that all the maintenance measures listed below be carried out every 500 hours of operation, or at the
latest after one year in the case of less intensive use. Defects caused by insufficient care may result in
limitations of the warranty claims.
CARE (CAN BE CARRIED OUT BY THE USER)
WARNING! Before carrying out any maintenance work, the power supply and, if possible, all
device connections must be disconnected.
NOTE! Improper care can lead to impairment or even destruction of the unit.
1. Housing surfaces must be cleaned with a clean, damp cloth. Make sure that no moisture can
penetrate the unit.
2. Air inlets and outlets must be regularly cleaned of dust and dirt. If compressed air is used, make sure
that damage to the unit is prevented (e.g. fans must be blocked for this case).
3. Cables and plug contacts must be cleaned regularly and freed from dust and dirt.
4. In general, no cleaning agents or agents with an abrasive effect may be used for maintenance,
otherwise the surface finish is likely to be impaired.
5. Units should generally be stored in a dry place and protected from dust and dirt.
18
Publicité
