Publicité
THRU
3
Balanced line output for forwarding the line input signal (male 3-pin XLR socket).
LC-DISPLAY
4
Multifunctional graphic LC display with illumination.
PUSH TO ENTER / HOLD TO MUTE
5
Rotary-push encoder for navigating in the main menu and submenus and for adjusting system settings.
Select the individual menu items in the main menu and in the submenus by turning the encoder and
confirm the selection by pressing the encoder. Change a numerical value or status in a menu item
by turning the encoder and confirm the change by pressing the encoder. To move up one level in the
menu structure, select the arrow symbol < and confirm the selection.
Press the encoder for about 2 seconds to mute the speaker column and again for about 2 seconds to
unmute it.
LEDS TO INDICATE THE STATUS OF THE UNIT
6
PWR – (Power)
The PWR indicator lights up white when the unit is correctly connected to the mains and
is switched on.
SIG – (Signal)
The SIG indicator lights up white when an audio signal is present in the unit.
LIMIT – (Limiter)
The LIMIT indicator lights up yellow when the amplifier module is operated in the upper limit range.
Brief illumination of the LED is not critical. To protect the system, any excessive signal level is
lowered smoothly by the integrated limiter. The level reduction is shown graphically under GR in the
display (Gain Reduction). If the limiter LED remains lit for a longer period, or permanently, reduce the
volume level.
PROT – (Protect)
The PROT indicator lights up red if the speaker column is overloaded or overheating.
The loudspeaker column is automatically muted. After reaching normal operating conditions, the
unit returns to the normal operating mode after a few minutes.
VENTS
7
To prevent damage to the unit, do not cover the ventilation openings on the back and ensure that air
can circulate freely.
PUSH TO UNLOCK SAT
8
On the rear upper edge of the speaker column is the release button for detaching a mounted satellite
speaker.
RETAINING BUSHES & STEEL BOLTS
On the underside of the speaker column are the retaining sockets for the EasyMount+ ® flying bracket
LD MAILA ® TMB and the steel bolts for mounting the column on the subwoofer LD MAILA ® SUB and also
an M20 knurled screw for securing to the subwoofer.
11
Publicité
