Publicité
Congratulations!
With your purchase you have decided on a
highquality product. Get to know the product
before you start to use it. Carefully read the
following instructions for use. Use the
product only as described and only for the given
areas of application. Keep these instructions
safe. When passing the product on to a third
party, always make sure that the documentation
is included.
Contents (Fig. A)
2 x Flap pannier including rain cover and
fasteners (1)
2 x Carrying straps (2)
2 x Reinforced bottom (3)
1 x Instructions for use
Technical Data
Dimensions: approx. 48 x 24.5 x 13.7cm
(h x w x d)
Volume: approx. 20 litres
Max. cargo capacity: 8kg
Date of manufacture (month/year):
01/2018
Intended Use
This product was designed as a pannier for
private use. The product is only intended for
installation on and use with suitable bicycles.
Do not transport unpackaged food in this
product. Not suitable for transporting pets.
Safety Notices
Risk of injury!
• Keep packaging materials and small parts
away from children. Suffocation hazard.
• Do not modify the product or the fasteners.
• Check the fasteners for damage and safe hold
before every use.
• Installation must not kink or pinch the Bowden
cables!
• Only mount the product to the bicycle in the
designated location and in accordance with
these instructions. Be sure the stability and
geometry of the bicycle allow the installation
of this product.
• The product may be loaded with max. 8kg
each. Be sure adding this load does not
exceed the weight limit of your bicycle.
• Please note, when loaded, this product will
change the handling of your bicycle.
• Loose objects must be secured against falling
out to protect you and other traffic from falls
and accidents.
• The product must not cover reflectors or lights.
• Regularly check the fasteners on the product
are secure.
• Load both products equally and secure items
against falling out.
• Attention! Secure the carrying strap so they
cannot catch in brake lines or the rotating
wheel.
• If necessary, remove the carrying strap and
store inside the product.
Hazards due to wear!
• Only use the product in good condition.
• Check the product for damage and wear
before every use. Product safety can only
be guaranteed when regularly checked for
damages and wear.
• Discontinue use if damaged.
• Protect the product from extreme tempera
tures, sunlight and moisture. Improper storage
and product use can cause early wear, result
ing in injuries.
Attaching the carrying strap
(Fig. B)
Attach the carrying strap as shown in figure B.
Be sure the carrying strap does not catch in the
brake elements or the rotating wheel.
Inserting the reinforcement
(Fig. C)
Position the bottom reinforcement (3) located in
side the product to fit the bottom of the product.
GB/IE
7
Publicité
