Siemens EQ500 classic connect TP51 Serie Manuel D'utilisation page 60

en Home Connect
11.3 Home Connect settings
Adapt Home Connect to your needs.
You can find the Home Connect set-
tings in the basic settings for your ap-
pliance. Which settings the display
Overview of the Home Connect settings
Here you can find an overview of the Home Connect settings and network set-
tings.
Basic setting
Wi-Fi
Appliance info
QR code
Connect to net-
work
Disconnect from
network
Connecting with
app
Remote start
11.4 Data protection
Please see the information on data
protection.
The first time your appliance is
registered on a home network
connected to the Internet, your
60
Selection
On
Off
-
-
Connect manually
Connect automat-
ically
-
-
Switch on remote
start
Switch off remote
start
shows will depend on whether
Home Connect has been set up and
whether the appliance is connected
to your home network.
Description
Switch off the wireless module during
long absences or to save energy.
Note: In networked standby mode
your appliance requires max. 2 W.
Display network and appliance inform-
ation
Press and follow the information on
the display.
Reconnect the appliance to your
home network.
Note: You cannot operate your appli-
ance via the Home Connect app
without a network connection.
Connect the appliance to the
Home Connect app or additional
Home Connect accounts.
Switch remote start on the appliance
on and off.
Note: With the Home Connect app
only switch-off is possible.
appliance will transmit the following
types of data to the Home Connect
server (initial registration):
Unique appliance identification
¡
(consisting of appliance codes as
well as the MAC address of the
Wi-Fi communication module in-
stalled).