Publicité
EngLIsh
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear eye protection.
Wear ear protection.
Do not expose the tool to rain or high humidity
or leave outdoors while it is raining.
Switch the tool off. Before performing any
maintenance on the tool, remove the battery
from the tool.
Keep bystanders away.
Directive 2000/14/EC guaranteed sound power.
Date Code Position (Fig. B)
The date code
14
, which also includes the year of manufacture,
is printed into the housing.
Example:
2021 XX XX
Year and Week of Manufacture
Description (Fig. A)
WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
Extension attachment
1
End attachment
2
Trigger switch
3
Lock‑on button
4
3‑speed toggle switch
5
Battery
6
Battery release button
7
Inflator/Deflator attachment
8
Intake
9
Intended Use
This cordless compact blower is designed for professional
blowing applications e.g. blowing of woodchip and other large
particle debris. Do not use in applications where dust is present
which is a classified hazardous substance, or contains hazardous
substances like quartz in concrete dust, hard wood dust etc.
DO nOT use under wet conditions or in the presence of
flammable liquids or gases.
The compact handheld blower is a professional power tool.
34
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
•
Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
•
This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack
before making any adjustments or removing/
installing attachments or accessories. An accidental
start-up can cause injury.
WARNING: Use only D
Attachments (Fig. A, C–E)
CAUTION: Ensure the battery is removed before
attaching or removing extension attachment
attachment
2
. A attachment must be attached to the
housing before use.
Blower
To connect the extension attachment, end attachment or
inflator/deflator attachment to the blower outlet:
1. Line up the pegs
10
on the inside of the attachement
with the notches
11
of the housing opening as shown in
Figure C.
2. Push the attachment onto the blower housing and turn
left to lock. Pull on the attachment to ensure it is securely
in place.
3. To remove the attachment, turn right to unlock and pull it
off of the blower housing.
Deflator
To connect the inflator/deflator attachment
intake
9
:
Line up the detents on the attachment with the notches on
the top, bottom and sides of the intake and press it onto the
intake
.
9
Inserting and Removing the Battery Pack
from the Tool (Fig. B)
WARNING: Before removing or installing battery, make
certain the speed lock lever
prevent switch actuation.
nOTE: Make sure your battery pack
To Install the Battery Pack into the Tool Handle
1. Align the battery pack
6
handle (Fig. B).
2. Slide it into the handle until the battery pack is firmly seated
in the tool and ensure that you hear the lock snap into place.
WALT battery packs and chargers.
e
1
or end
to the deflator
8
2
is in the off position to
is fully charged.
6
with the rails inside the tool's
Publicité
