Publicité
EngLIsh
COMPACT HANDHELD BLOWER
DCV100
Congratulations!
You have chosen a D
WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
Battery type
Power output
Air flow rate max
No load speed
Air speed max
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum) according to
EN62841‑1:
L
(emission sound pressure level)
PA
L
(sound power level)
WA
K (uncertainty for the given sound level)
Vibration emission value a
=
h
Uncertainty K =
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.
WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of work patterns.
26
EC‑Declaration of Conformity
Machinery Directive
WALT one of the
e
Blower
DCV100
DCV100
V
18
D
DC
1
Data are in compliance with:
Li‑Ion
2006/42/EC, EN 62841‑1:2015.
These products also comply with Directive 2014/30/EU and
W
265
2011/65/EU. For more information, please contact D
m³/min
2.8
the following address or refer to the back of the manual.
/min
0–18000
The undersigned is responsible for compilation of the technical
km/h
290
file and makes this declaration on behalf of D
kg
1.3
dB(A)
87
Markus Rompel
Vice‑President Engineering, PTE‑Europa
dB(A)
98
D
dB(A)
3
65510, Idstein, Germany
5.11.2021
m/s
2
<2,5
m/s
2
1,5
Blower
DCV100
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended).
D
Data are in compliance with:
EN 62841‑1:2015
For more information, please contact D
address or refer to the back of the manual.
These products also comply with The Electromagnetic
Compatibility Regulations 2016, S.I.2016/1091 (as amended) and
the Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended). For more information, please contact
D
manual.For more information, please contact D
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
WALT declares that these products described under Technical
e
WALT, Richard‑Klinger‑Straße 11,
e
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
REGULATIONS 2008
WALT declares that these products described under Technical
e
WALT at the following address or refer to the back of the
e
WALT at
e
WALT.
e
WALT at the following
e
WALT at the
e
WALT.
e
Publicité
