Publicité
Introduction / Safety instructions
Roll holder
25
Wire outlet
26
Adjusting knob
27
Pressing roller unit
28
Feed roller (2x)
29
Feed roller holder
30
Cable assembly intake
31
Torch neck
32
Storage compartment for welding nozzles
33
Technical Data
Mains connection:
Welding current I
:
2
Duty cycle X:
Open-circuit voltage U
0
Highest rated value
for the mains current:
Effective value for highest
rated current:
Welding wire drum max.:
Welding wire diameter max.: 1.0 mm
Fuse:
Weight:
Scope of Delivery
1 Flux-cored arc welding unit PFDS 33 B3
1 Burner nozzle (pre-installed)
4 Welding nozzle (1x 0.9 mm pre-installed; 1x
0.8 mm; 1x 0.6 mm; 1x 1.0 mm)
1 Chipping hammer with wire brush
1 Flux-cored wire Ø 0.9 mm / 450 g
1 Welding helmet
1 Carrying strap
1 Instructions for use
30 GB/IE/NI
230 V∼ / 50 Hz
(alternating current)
40–90 A
10 % at 90 A
welding current,
60 % at 40 A
welding current
:
32 V
I
14 A
1 max.
I
4.4 A
1 eff
approx. 1000 g
16 A
13.65 kg
Safety instructions
Please carefully read the instructions
for use and follow the specified no-
tices. Familiarise yourself with the
tool, its proper use and the safety
notices using these instructions for
use. The nameplate contains all the
technical data for this welding tool,
please learn about the technical
facts of this tool.
This device may be used by
children aged 16 years and up,
as well as by persons with reduced
physical, sensory or mental ca-
pacities, or lacking experience
and / or knowledge, so long as
they are supervised or instructed
in the safe use of the device and
understand the associated risks.
Do not allow children to play with
the appliance. Cleaning and user
maintenance should not be per-
formed by children without super-
vision.
Only have repairs and / or main-
tenance performed by electrically
skilled persons.
Only use the welding cables
included (PFDS 33 B3 H01N2-
D1x10 mm²).
Publicité
