Emptying the debris bin
! DANGER: always wear a mask when emptying
the debris bin, so as to protect the respiratory
tract from the dust that will inevitably be raised
during this operation.
When work has finished, proceed to empty the debris bin,
following the instructions given
-
Switch the filter shaker on for 5 seconds.
! ATTENTION: before carrying out the operations
described below, stop on a flat and level surface,
switch off the machine, remove the ignition key and
apply the parking brake.
-
Move the machine close to the refuse container.
-
Lower and rotate the debris bin clamp lever.
below:
-
Remove the bin and empty it.
-
Reposition the bin and lock in place with the lever.
Moving the machine when not in operation
To move the machine, proceed as follows:
-
Turn the ignition key to switch the machine on.
-
Select the direction of travel.
-
Press the accelerator pedal.
-
The top speed of the machine is adjusted by
turning the potentiometer.
-
To stop the machine, release the accelerator pedal
and depress the brake pedal; refer to the section
"Service brake and parking brake ".
-
Turn the ignition key to switch off the machine.
-
Apply the parking brake: see section "Service
brake and parking brake ".
EN
21