Télécharger Imprimer la page

Tennant S680 Manuel D'instructions page 18

Publicité

-
P1, light duty cleaning program for quartz
concrete floors, smooth floors.
-
P2, medium duty cleaning program for fitted
carpet or other surfaces.
-
P3, heavy duty cleaning program for asphalt
or uneven floors with coarse debris.
! NOTICE
To change from one program to another, first
deselect the existing program, then select the new
program.
-
Lower the side brushes by pulling the relative
levers out and easing them down.
! NOTICE
A resettable fuse is fitted above each of the side
brush operating levers.
In the event that a side brush should stop working,
press the button to reset the fuse.
-
Start cleaning, turning the steering wheel by hand
and depressing the accelerator pedal.
-
The maximum operating speed can be set by
turning the speed potentiometer.
-
The maximum speed of rotation of the side
brushes can be set by the operator.
-
If the machine has to be used on damp ground, it
is essential to protect the paper filter: accordingly,
shut off the suction motor by pressing the suction
button.
EN
18

Publicité

loading