Maico PP 45 RHK Notice De Montage page 23

UK
UK
Mounting instructions
These mounting instructions contain impor-
tant information about preparing for mounting
and mounting the unit components during
the shell phase. Please read the instructions
carefully. Pay particular attention to the safety
instructions. Follow the instructions.
Before commissioning, also read the operating
instructions for the ventilation unit.
For more information about final mounting,
see:
● Ventilation unit with enclosed mounting
instructions for final mounting kit
● Accessories with enclosed supplement
● Commissioning software online - Down-
load using the following QR code or visit
www.maico-ventilatoren.com.
Hand these instructions over to the owner
for safe-keeping once the installation work is
complete.
Table of Contents
1 Scope of delivery ..................................23
2 Specialist installer qualification ..........24
3 Intended use ..........................................24
4 Safety instructions and warnings .......25
5 Application examples ...........................27
6 Requirements at the installation site ..28
7 Technical data .......................................28
7.1 Technical data for PP 45 .....................28
7.2 Technical data for PPB 30 ..................28
7.3 Number of ventilation units .................29
8 Mounting preparations .........................29
8.1 Mounting information ..........................29
9 Mounting the wall sleeve and external
cover ......................................................30
9.1 Mounting wall sleeve ..........................30
10 Mounting of soffit elements PP 45 LE,
PP 45 LEV and PP 45 LEW90 ................ 36
1 Scope of delivery | UK
11 Next steps for final mounting ..............39
12 Installation dimensions ........................39
1 Scope of delivery
Scope of delivery depends on system
configuration. For installation dimensions
 Chap 12.
For scope of delivery of external cover,
see external cover supplement.
Shell sleeve, short PP 45 RHK (0059.0081)
Shell sleeve, long PP 45 RHL (0059.0082)
Wall sleeve, plaster protective cover and
shims. For mounting  these shell mounting
instructions.
Soffit element PP 45 LE (0093.0179)
(only for connecting PP 45 units)
● Soffit element, rubber seal wall sleeve,
complete stainless steel external grille (with
external grille, holder and wall seal).
For mounting  these shell mounting
instructions.
● Optional: Extension element PP 45 LEV
(0093.1483). For mounting  Chapter 10.
Compensating frame PPB 30 ARE / ARW
(0093.1501 / 0093.1525)
● Compensating frame for mounting on thin
walls.
● The PPB 30 and PP 45 external covers can
be mounted on the compensating frame.
● PPB 30 ARE (stainless steel compensating
frame) with PPB 30 ARE BB fixing plate are
used for mounting PPB 30 AE and PP 45 AE.
● PPB 30 ARW (white compensating frame)
with PPB 30 ARW BB fixing plate are used
for mounting PPB 30 AW and PP 45 AK/ PP
45 AW. No fixing plate is necessary when
mounting PPB 30 AK.
Fixing plate PPB 30 ARE BB / ARW BB
(0093.1526 / 0093.1527)
Fixing plate for compensating frame
PPB 30 ARE / PPB 30 ARW.
23