Publicité
New Construction Accessories
LATERAL DUCT ADAPTER Attaches to the Friedrich PTAC/PTHP unit to direct
PDXDAA
up to 35% of the total airflow to a second room. The unit mounted duct plenum
features a front mounted aluminum grille that has two positions to provide the
most optimal air direction. The air may be directed to either the left or the right of
the unit through the supplied 3.5 H" x 7 W" x 47" L plenum. Plenum may be cut
to length by the installer. Kit includes duct plenum, front grille, 47" duct extension,
duct discharge grille, duct end cap and all necessary mounting hardware.
LATERAL DUCT EXTENSION Additional 3.5 H" x 7" W x 47" L plenum for use
PDXDEA
with the LATERAL DUCT ADAPTER. A maximum of 3 duct extensions total may
be used. Note: Ducted airflow is reduced as duct length is increased.
REPLACEMENT FILTER PACK These are original equipment return air filters.
PXFTA
They are reusable and can be cleaned by vacuuming, washing, or blowing out,
and are sold in convenient ten-packs. (Two filters per chassis).
DIGITAL REMOTE WALL THERMOSTAT Single stage cool, single stage heat
RT7
for PDE models or single stage cool, dual stage heat for PDH model thermostat
features high/low fan speed switch. Thermostat is hard wired and can be battery
powered or unit powered. Features backlit display and multiple configuration
modes. For use on PD-series Friedrich PTACs and Vert-I-Paks.
RT7P
DIGITAL THERMOSTAT Wireless, single stage, wall-mounted digital thermostat
WRT2
with two fan speeds. Features backlit display and multiple configuration modes.
FRIEDRICHLINK® ENERGY MANAGEMENT THERMOSTAT Integrated oc-
cupancy sensor uses a combination of motion and thermal sensing technologies
for accurate occupancy detection. Reliable occupancy detection allows saving en-
ergy when rooms are unoccupied. Energy saving presets eliminate the guesswork
and make it easy to adjust the energy saving settings.
Wireless thermostat with occupancy sensor.
EMWRT2
Wired thermostat with occupancy sensor.
EMRT2
31
Publicité
