Publicité
60982
Please note that the colors for the wires conform to the
European NEM standard. A cross reference of the Marklin color
scheme can be found following.
gray
Motor Connection 2
black
Conductor Current Pickup, Left
white
Front Lights
green
Aux 1 physical output
blue
Common Wire for Lights
yellow
Rear Lights
red
Conductor Current Pickup, Right / Center
orange Motor Connection 1
violet
Aux 2 physical output
blue
orange marking IN1 (programmer)
blue
yellow marking IN2 (programmer)
blue
black marking GND
violet
yellow marking Aux 3 physical output
violet
white marking
Aux 4 physical output
Solder pads above
4 schwarz
3 grün
2 gelb
1 orange
Locomotives or powered rail cars with NEM 8-pin connector.
Solder the wires to the correct solder pads according to the diagram
above. Insert the plug into the connector while paying attention to
the positioning (Information on lighting see Dceoder 60972)
24
Decoder ground (Pr0grammer)
Solder pads below
8 rot
7 blau
6 weiß
5 grau
Cross Referencing the Colors for the Wires
Description
Motor Connection 2
Conductor Current Pickup, Track, Left (DC)
Outer (AC)
Front Lights
Aux 1 (physical output)
Common Wire for Lights
Rear Lights
Conductor Current Pickup,
Track, Right (DC) Center (AC)
Motor Connection 1
Aux 2 (physical output)
IN1* (programmer)
IN2 * (programmer)
GND* Decoder ground (Programmer)
Aux 3 (physical output)
Aux 4 (physical output)
* Currently used only for the programmer.
Wire Color
NEM
Märklin
gray
blue
black
brown
white
gray
green
brown/red
blue
orange
yellow
yellow
red
red
orange
green
violet
brown/green
Blue / orange marking
Blue / yellow marking
Blue / black marking
Violet / yellow marking
Violet / white marking
Publicité
