Maintenance; Changing The Battery; Cleaning - Chauvin Arnoux C.A 43 FILEDMETER Mode D'emploi

MAINTENANCE

CHANGING THE BATTERY

Before making a measurement, check by switching On the instrument that the battery
symbol is not visible on the display. If it is, you must change the battery.
The user has one minute in which to change the battery without having to reset the clock.
Open the battery compartment at the back of the instrument using a coin (tool release screw).
- Remove the battery inside.
- Change the battery (type 6 LF 22) in accordance with the polarity shown in the battery
compartment.
- Close the battery compartment using the coin.
- Check, by switching On the instrument, that the displayed time is not flashing. If it is, reset
the time on the clock.
With the new battery, the indication of the available battery capacity, shown when the
instrument is switched On, may be greater than 100%.

CLEANING

The case can be cleaned with any non abrasive and non acid product, such as: alcohol,
flugene, etc.
MAINTENANCE
Repair operations that may be necessary are made easy as the Fieldmeter has only one circuit
that combines all the components. Nevertheless, repair must only be carried out by qualified
personnel.
To check the accuracy of the instrument and its probes, a periodic calibration every two years
should be expected for the instrument, and every year for the probes.
82