Publicité
18
Operation
OPERATION
EN
3.1 User Interface
USER MANUAL
/ /
Enables monitoring of Current / Wire Feed Speed and Function settings,
Digital Display
• Indicates the wire feed speed when no welding is performed.
• Indicates "0" when the torch is pressed in idle position (without welding).
• Provides welding current during welding.
Enables monitoring of Voltage and Function settings,
Digital Display
• Displays '"0" when no welding is performed.
• When the torch trigger is pressed in idle position (without welding), the idle
operating voltage is displayed.
• Displays the welding voltage during welding.
• Protection alert when the machine is overheated.
Thermal Led
• Pressing the button for 3 seconds will access the menus and each press will change
Menu Button
the function. Select the desired setting with the help of the adjustment button.
• Changes the parameter and function settings.
Adjustment Button
• In normal mode, the wire feed speed is changed with the (idle) control knob.
RS 600 MW
www.magmaweld.com
Publicité
