Turbo mode on carpets, which activates the maximum suction power when the robot
vacuum cleaner detects a carpet, and the x2 option which allows the selected cleaning
mode to be doubled.
Complete cleaning mode
-
Select this mode to perform a deep cleaning of your house. The robot vacuum cleaner will
clean in Edge mode and continue zigzagging horizontally and vertically. It will then return
to the self-emptying base.
-
To activate this mode, select the Complete Cleaning option on the app.
Edge mode
-
When this mode is selected, the robot vacuum cleaner will clean along walls and around
furniture. It will then return to the self-emptying base.
-
Press the edge cleaning mode in the app.
Square spiral mode
-
When this mode is enabled, the robot vacuum cleaner will thoroughly clean a specific
area. It will start cleaning at a specific spot and will move outwards in a square-spiral
motion, and it will return to the starting spot in an inwards square-spiral motion.
-
Once finished, the robot vacuum cleaner will return to the self-emptying base directly.
-
Before using this mode, place it in the spot you wish to clean.
-
Select the spiral cleaning mode on the app.
Scrubbing mode
1.
Place the Spin Mops on the mixed tank and fill the water tank.
2. Insert the mixed tank into the robot vacuum cleaner and select the cleaning mode and
scrubbing level in the app: off, low, medium, or high.
3. Once you have selected the desired scrubbing level, the robot vacuum cleaner will start
the All in One function to vacuum, scrub, and sweep simultaneously thanks to its mixed
tank.
Note:
-
To ensure a perfect scrubbing from the start, it is suggested to dampen the mop evenly
with water before fixing it to the mixed tank. It is also recommended to wash the mop
after every use.
-
It is recommended to be present when the robot vacuum cleaner is scrubbing.
Manual mode
The robot vacuum cleaner can be moved manually by selecting manual mode in the app and
using the arrow keys.
Conga 9990 AI Spin Revolution Ultra Power Home
ENGLISH
69