Publicité
5. Water inlet
6. Water tank
Please note:
The graphics in this manual are schematic representations and may not exactly match the
appliance.
2. BEFORE USE
-
This robot vacuum cleaner includes a package designed to protect it during transport.
Take the robot vacuum cleaner out of the box. Keep the original box and other elements
in a safe place, as this will help you prevent damage to the robot vacuum cleaner when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
-
Make sure all parts and components are included and in good conditions. If there is any
piece missing or not in good condition, immediately contact the official Cecotec Technical
Support Service.
WARNINGS:
-
Remove all objects around the robot vacuum cleaner such as clothing, papers, cables,
curtains, or other fragile objects which may block or slow down the operation of the robot
vacuum cleaner. Fig. 4
-
If the room to be cleaned is near a balcony or stairs, a physical barrier should be placed to
prevent the robot vacuum cleaner from falling and getting damaged, thus ensuring safe
operation. Fig. 5
-
Do not use the robot vacuum cleaner for liquids. Fig. 6.
-
Direct exposure to sunlight or heavy light contrasts may affect the correct operation of
the sensors. If this happens, the robot vacuum cleaner will cease operation. Move it to a
new location for it to start running again.
Installing the robot vacuum cleaner and the self-emptying base
1.
Place the self-emptying base against a wall and leave a minimum free space of 1.5
metres to the front and 0.5 metres to each side. Fig. 7
2. Plug the self-emptying base to a power socket. Wind and store the remaining cable to
prevent accidents.
3. Install the side brush. Fig. 8
4. Hold down the Start/Pause button for a few seconds.
5. When the indicator light turns on, put the robot vacuum cleaner in the self-emptying base
and make sure the charging terminals of the robot match those of the base. If the light
is flashing blue, it means the battery is not completely charged. To ensure the maximum
cleaning time, wait until the light turns into steady blue, as this indicates that the battery
is fully charged and that the robot vacuum cleaner is ready to clean. Fig. 9
Conga 9990 AI Spin Revolution Ultra Power Home
ENGLISH
65
Publicité
