Télécharger Imprimer la page

cecotec CONGA 9990 AI SPIN REVOLUTION ULTRA POWER HOME Manuel D'instructions page 67

Publicité

Once in the app, press on the "+" symbol in the top right corner and the "Add device"
option.
On your robot vacuum cleaner, press and hold for a few seconds the Home button until
the robot beeps and the buttons change their flashing frequency.
Press on the robot option you are using.
Enter your home Wi-Fi password.
Follow the steps shown in the app until the linking process is completed.
First use
-
Once the robot vacuum cleaner and the self-emptying base are installed, follow the steps
below before the first cleaning.
-
First of all, fully charge the robot vacuum cleaner. It is suggested to allow the robot to
charge overnight. Once fully charged, it may carry out the first cleaning cycle and save
the first map. To do this, press the start/pause button in the app and the robot will map
your house to continue cleaning in the edge and zigzag mode.
-
If your house is very large and the robot vacuum cleaner runs out of battery, it will
return to the self-emptying base, save both complete and incomplete maps, and, once
recharged, it will resume cleaning where it left off until the entire cleaning surface
has been mapped. The robot vacuum cleaner is constantly mapping, so it adapts in an
individualised and personalised way to the particularities of each house while constantly
improving its map. 
About the self-emptying base
-
The self-emptying base includes a loading and emptying function and a new dirt-
disposal bag. After cleaning, the robot will automatically return to the self-emptying
base to recharge. The self-emptying base will empty the dirt tank based on the emptying
scheduled selected on the app.
-
If the robot vacuum cleaner is charging in the self-emptying base, you can force the robot
to self-empty. To do so, press the "Self-emptying" option in your application.
3. OPERATION
Robot vacuum cleaner's buttons
Auto mode
-
Press the Start/Pause button on the robot vacuum cleaner or select it in the app to make
it start cleaning automatically in Edge mode and then perform a cleaning cycle in an
orderly zigzag pattern while it also recognises which areas have been cleaned and which
have not. The robot vacuum cleaner will automatically plan the cleaning route during
cleaning. 
-
If you control the robot vacuum cleaner manually during this mode, the robot will
Conga 9990 AI Spin Revolution Ultra Power Home
ENGLISH
67

Publicité

loading

Ce manuel est également adapté pour:

Eu01 100148