Publicité
Make sure the lubrication oil is clean and always avail-
able in sufficient quantity. Change the oil according to
the instructions given in the chapter „Maintenance"
of this manual.
Wear safety gears including goggles or a screen, ear pro-
tection, breathing mask and protective clothing.
After connection to the mains and switching on, the
machine starts automatically.
Air escaping from the compressor may not be inhaled.
Check the pressure control valve daily before starting
work.
Drain humidity from the tank. Avoid tank corrosion.
Cut off the mains supply, remove the power supply
plug, and relieve the pressure before starting mainte-
nance work.
Wear goggles.
Wear ear protection.
Wear a breathing mask.
Never direct the output air from the compressor towards
a part of the body or a person. Never try to block the air
escape with your finger or a part of your body.
Use as authorized
The machine meets all valid EC machine guidelines.
The machine must only be used in technically perfect
condition and conscious of the risks, in accordance
with its designated use and the instructions set out in
the operating manual.
Any functional disorders, especially those affecting the
safety of the machine, must be rectified immediately.
The safety, working and maintenance instructions of
the manufacturer as well as the dimensions given in the
chapter „Technical data" must be adhered to.
The relevant accident prevention regulations and other,
generally recognized safety-technical rules must also
be adhered to.
The machine may only be used, maintained, and oper-
ated by persons familiar with it and instructed in its
operation and procedures.
Arbitrary alterations to the machine release the manu-
facturer from all responsibility for any resulting dam-
ages.
The machine may only be used with original accesso-
ries and original tools supplied by the manufacturer.
international 17
Publicité
