user's instructions
operAtion - General
The appliance is intended only for domestic use, not
for professional use.
1. Fan housing
2. Fan blades
3. Speed switches
4. Motor
5. Stand, with rubber feet
6. Power cord and plug
operAtion - before use for the first time
Remove the fan from the packaging.
operAtion - Ventilate
1. Put the fan on a horizontal and clean floor.
2. Point the front of the fan in the direction which
you wish to ventilate. You can also adjust the
fan to obtain a slightly downward, horizontal, or
slightly upward ow of air, tilt the fan housing to
the required angle.
3. Put the plug into the wall socket.
4. Switch on the fan by using the switches of one
of the three speeds:
a. Position 1, the fan operates at low speed.
b. Position 2, the fan operates at normal speed.
c. Position 3, the fan operates at high speed.
5. Stop the fan by turning the rotary switch to
position '0'.
It is inadvisable to expose people to a cold ow of air for a long period of time (in particular, small children
and elderly people).
cleAninG And MAintenAnce
Over the course of time dust can accumulate between the spokes in the fan housing, and on the fan blades.
Always begin by trying to remove the dust with a brush and/or vacuum cleaner. If this does not remove all
the dust you can always dismantle the fan and clean it:
1. Remove the plug from the wall socket.
2. Release the clips around the rim of the fan
housing.
3. Use a small crosshead screwdriver to remove
the crosshead screw at the bottom of the fan
housing.
4. Remove the front of the fan housing.
5. Clean the fan blades with a damp cloth. Dry
thoroughly with a dry cloth.
6. If necessary, clean the motor housing with a dry
cloth or brush.
7. Reassemble the front of the fan housing. Make
sure that the fork on the fanhousing rim hooks
into the rim on the fixed half of the fan housing.
Also make sure that the holes for the crosshead
1
13
3
2
4
5
6