operAtion - General
The appliance is intended only for domestic use, not
for professional use.
1. Fan blades
2. Fan housing
3. Motor housing
4. Remote control
5. Control unit
6. Telescopic stand
7. Height lock
8. Power cord and plug
MontAGe - Assembling the stand
1. Lay the two feet of the stand across each other,
at right angles, and fit them to the upright using
the four screws.
2. Remove the height lock from the upright.
3. Slide the protective cover onto the upright, and fit
it over the feet.
4. Fit the height lock to the upright.
user's instructions
1
2
3
5
6
7
8
HI
OFF
4H
MID
TIMER
2H
LOW
ON/SPEED
1H
SLEEP
0.5H
NATURAL
SWING
18
OFF
SWING
TIMER
MODE
4
ON/SPEED