operAtion - General
The appliance is intended only for domestic use, not
for professional use.
1. Fan blades
2. Fan housing
3. Motor housing
4. Swivel button
5. Control unit
6. Stop button
7. Speed buttons
8. Stand lock
9. Power cord and plug
10. Telescopic stand
11. Height lock
operAtion - before use for the first time
Remove the fan from the packaging.
MontAGe - Assembling the stand
1. Lay the two feet of the stand across each other,
at right angles, and fit them to the upright using
the four screws.
2. Remove the height lock from the upright.
3. Slide the protective cover onto the upright, and fit
it over the feet.
4. Fit the height lock to the upright.
1
5
6
18
user's instructions
2
4
7
10
11
9
3
8