Pabx/ Supplementary Services; R Button On Private Branch Exchanges - switel DFT727 Mode D'emploi

PABX/ Supplementary Services

7 PABX/ Supplementary Services

R button on private branch exchanges

If the telephone is connected to a private branch exchange, all the functions as-
sociated with the R-button, such as transferring calls and automatic call back,
can be used. Please refer to the information in the operating manual enclosed
with your private branch exchange with regard to the Flash time to set in order to
use these functions. The dealer where you purchased the exchange can provide
information as to whether the telephone will work properly with the exchange.
Setting the Flash time, . Page 149.
Number for an outside line
In the case of private branch exchanges, it is necessary to dial a specific number
in order to obtain the dialling tone for an outside line. This number for an outside
line can be stored. When the telephone detects this number preceding a phone
number entered, a dialling pause is automatically inserted after the number.
Setting the number for an outside line, . Page 149
Entering a dialling pause manually
It is possible to insert a dialling pause manually after the number for an outside
line to be able to continue dialling directly without waiting for the dialling tone.
2 sec 0
After dialling the number for the outside line, the telephone waits 3 seconds
before dialling the actual phone number.
R-button and supplementary services
Your telephone supports the supplementary services offered by your telephone
network provider, such as brokering, call waiting and conference facilities. These
supplementary services can be used via the R-button. Please ask your tele-
phone network provider which Flash time you need to set in order to use the sup-
plementary services. Please contact the telephone network provider with regard
to enabling the supplementary services. Setting the Flash time, . Page 149.
144
The pause can also be entered with the phone numbers in the phone
book.
Insert dialling pause