Publicité
2. Reducing the brightness
Press the "
" button Dimmer –
the brightness. Pressing it briefly will gradually
decrease the brightness as pressed. Holding
the "
" button Dimmer –
decrease the brightness to the minimum.
30 minute timer
1. Activating the timer
Press the "
" button
to switch on timer mode.
The light and the Bluetooth function (music) will
automatically switch off after approx. 30 minutes.
2. Deactivating the timer
To deactivate the timer function during the
30 minute period, press the "
again, holding more than 3 seconds.
The timer function is now turned off.
Note: You can only turn the timer off when
bluetooth is activated.
Bluetooth connection
1. Bluetooth connection
Press the audio "
confirms reception of the signal.
Approx. 1–2 seconds later the Bluetooth con-
nection will be accompanied by music and es-
tablished automatically, the blue LED inside the
LED ceiling light begins to flash rapidly.
A brief melody will sound once connected.
When connecting with your mobile, tablet, etc.
for the first time, select Bluetooth connection
„LED Ceiling Lamp".
2. Disconnecting Bluetooth
Press the audio "
confirms reception of the signal. Bluetooth has
been disconnected.
, to reduce
13
will automatically
13
for approx. 3 seconds
14
" button
14
" button (audio)
. A beep
21
" button (audio)
. A beep
15
Set-up / Maintenance and cleaning
Once connected you may use the
following audio controls:
Controlling the music volume
1. Lowering the music volume
Press the "
" button Volume –
volume. Pressing it briefly will gradually decrease
the volume as pressed. Holding the "
Volume –
will automatically lower the vol-
20
ume to the minimum.
2. Increasing the music volume
Press the "
" button Volume +
the volume. Pressing it briefly will gradually in-
crease the volume as pressed. Holding the "
button Volume +
16
the volume to the maximum.
Selecting a song
1. Previous song
Press the "
" button Select song (previous)
to select a previous song or to replay the
19
song from the beginning.
2. Next song
Press the "
" button Select song (next)
select the next song.
3. Pause
Press the "
" button Pause / Bluetooth Con-
nection Standby
18
the "
" button Pause / Bluetooth Connection
Standby
will set the Bluetooth connection to
18
standby for approx. 10 min. The Bluetooth con-
nection will then be closed.
Maintenance and cleaning
WARNING! RISK OF ELECTRIC SHOCK!
Disconnect the light from the mains circuit before
cleaning. To do so, remove the fuse or switch off
the circuit breaker in the fuse box (0 position).
to lower the
20
" button
to increase
16
will automatically increase
to
17
briefly to pause. Holding
GB/IE
"
21
Publicité
