Publicité
GB
IE
Grinding disc dimensions
Outer diameter ................... Ø 104 mm
Bore hole ............................. Ø 22 mm
Thickness ................................ 3,2 mm
Disc speed .................... max. 40 m/s*
Weight ..................................... 2,40 kg
Sound pressure level
(L
) ............. 68,5 dB (A); K
pA
Sound power level (L
measured .......74,1 dB(A); K
Vibration (a
) ...... 3,05 m/s
n
* The grinding disc must withstand a rotational
speed of at least 40 m/s.
** A break is introduced after 15 minutes of
uninterrupted operating duration until the de-
vice temperature differs 2 K (2 °C) less than
room temperature.
The specified noise emission value has
been measured according to a stan-
dardised testing method and may be used
for comparison with another power tool.
The specified noise emission value may
also be used for an introductory assess-
ment of the exposure.
Warning: The noise emission val-
ue whilst actually using the power
tool may vary from the given values
regardless of the type and way in
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. All parts of the op-
erating cycle have to be considered
while doing so (for example, times
when the power tool is switched off
and times when it is switched on
but running without any load).
22
= 3 dB (A)
pA
)
wA
= 3 dB(A)
wA
; K= 1,5 m/s
2
Grinding disc PA 104 WA 100
(from scope of delivery):
Idling speed n
Disc speed ....................... max. 40 m/s*
Outer diameter ...................... Ø 104 mm
Bore hole ................................ Ø 22 mm
Thickness ................................... 3,2 mm
The supplied grinding disc is only
suitable for sharpening hobby saw
chains with a chain pitch of 1/4",
2
0.325" or 3/8".
Safety information
CAUTION!
The following basic safety precau-
tions must be observed while using
power tools to protect against elec-
tric shock, injury and risk of fire.
Please read all instructions before
using this power tool and keep the
safety instructions in a safe place.
Symbols on the device
Caution!
Injury hazard caused by rotating
tool! Keep hands away.
Danger of electric shock!
Remove the plug from the mains
socket before carrying out mainte-
nance and repair work.
Do not expose device to rain.
Please read and comply with the
operating instructions for the de-
vice!
Risk of injury!
Wear eye and hearing protection!
............. max. 7350 min
0
-1
Publicité
