Parts Identification And Nomenclature - Star TSP700 Série Mode D'emploi

1. Parts Identification and Nomenclature

Power switch
Used to turn on/off
power to the printer.
Control panel
Features LED indica-
tors to indicate printer
status and switches to
operate the printer.
Interface connector
For connection to a
host computer.
Roll paper
Cover open lever
Pull this lever in the
direction of the
arrow to open the
printer cover.
Peripheral drive connector
Connects to peripheral
units such as cash
drawers, etc.
Do not connect this to a
telephone.
(For USB interface)
(For parallel and
Ethernet interfaces)
User's manual
(A model with an
RS-232C interface
is not available.)
– 1 –
Printer cover
Open this cover to load or
replace paper.
Power connector
For connection of
the AC adapter.
Never unplug the
AC adapter while
the printer is on.
Ferrite core Fastener
(Included with
Parallel and
Ethernet model)