Publicité
1
2
≥If the Palmcorder is used as a Web Camera, the quality of the
video to be exchanged will depend on the Internet connection
status.
≥If the USB Connection Cable is disconnected from the personal
computer, the WEB CAMERA mode is cancelled.
≥In the WEB CAMERA mode, video cannot be recorded onto a tape
or a card.
≥If the Palmcorder is used as a Web Camera while virus checking
software is running, the Palmcorder's operation may stop midway
through. In this case, exit the NetMeeting, reconnect the
Palmcorder and restart the NetMeeting.
≥When the LCD Monitor is opened and rotated frontward in the
WEB CAMERA Mode, the Viewfinder becomes deactivated.
ª Setting up the NetMeeting
When starting the NetMeeting for the first time, its setup screen is
displayed. (However, the screen is not displayed if the NetMeeting
setup has already been done.)
1
Click [Next].
2
Enter the User information, carefully read the
displayed contents, and then proceed.
≥Please refer to the instruction manual of your personal
computer for how to configure the audio and the microphone.
≥To communicate with persons using Windows in other
languages, setting up using alphabets or numbers is
recommended.
3
After these, without setting up anything else, please
click [Next] to continue further, and the setup is
completed.
≥NetMeeting is activated.
≥Please refer to the HELP file of the Windows NetMeeting for
understanding its operation.
≥During set up, if [Primary video capture device] selection
screen is displayed, [Panasonic DVC Web Camera] is
selected.
≥Send the sound by using the microphone attached to the
Personal Computer.
≥If the Palmcorder is used as a Web Camera continuously for
two hours, the communication is automatically shut OFF. In
this case, restart NetMeeting and set up the communication
again.
73
Publicité
