Publicité
4
1
2
1
2
Installing USB Driver
Please install USB Driver first before connecting the Palmcorder to
your Personal Computer with the USB Connection Cable.
1
Turn on the Personal Computer and start up
Windows.
2
Insert the supplied CD-ROM into the personal
computer's CD-ROM drive.
≥Quit all applications.
≥[Setup Menu] appears.
3
Finish installation by following the on-screen
instructions.
≥Click [Next] and proceed with installation.
≥Carefully read the license agreement on the window, and if you
agree click [Yes]. Software is not installed if [No] is clicked.
≥After completing the installation, Click [Finish].
For Windows XP Users
1
The message
testing by the manufacturer has confirmed functionality of
this Palmcorder with Windows XP. Click [Continue Anyway]
and proceed.
For Windows 2000 Users
2
The message
testing by the manufacturer has confirmed functionality of this
Palmcorder with Windows 2000. Click [Yes] and proceed.
4
Click [OK] when the [Restarting Windows] Dialogue
appears.
≥Reboot the computer to finish installing USB driver.
≥Installation continues after the computer reboots if you
selected additional software.
≥If you use Windows XP/2000, you need to specify the folder in
which the driver is to be installed when the Palmcorder is
connected for the first time. (l 71)
≥A message indicating a conflict between versions may be
displayed during the installation. This will not cause a problem.
Simply click [Yes] to proceed with the installation.
≥Depending on the OS version, illustrations and icon names may vary.
ª For Windows 98SE/Me Users
The following messages may be displayed during the installation
depending on the environment of the personal computer. Install the USB
Driver as instructed below. Otherwise, it won't be installed correctly.
1
The message, "The file 'PMJ1519X.EXE' on
[Unknown] cannot be found..." is displayed.
≥Enter "D:\USBDriver\Drivers\WebCam" (if the CD-ROM drive is
assigned to the D drive) and click [OK].
2
The message "The file 'kstvtune.ax' on [Unknown]
cannot be found..." is displayed.
≥Enter "C:\Windows\system" for Windows 98SE.
≥Enter "C:\Windows\options\CABS" for Windows Me.
≥If the "kstvtune.ax" file is missing in one of the 2 above-mentioned
folders, insert the OS CD-ROM and assign the path.
3
The message "The file 'ksclockf.ax' on [Unknown]
cannot be found..." is displayed.
≥Enter "C:\Windows\system".
≥If the "ksclockf.ax" file is missing in the above mentioned
folder, insert the OS CD-ROM and assign the path.
≥You may click [Browse] to look for and assign the path.
70
is displayed during installation. However,
is displayed during installation. However,
Publicité
