Malfunctions And Remedies - IARP EIS 104 TI Instructions D'emploi Et D'entretien

DOOR REGULATION MODELS EIS 104.2
This unit is equipped with sliding doors. The levelling operation is very important:
a bad levelling can cause a fold of the door frames when the loading operation is
finished. The cabinet must be installed on an even surface; it is necessary to settle
the sliding doors so that they will be parallel. In order to do this you can adjust the
wheel (A-B).
A
4

MALFUNCTIONS AND REMEDIES

Most of the functioning inconveniences are generally due to defective electrical connections.
These problems can usually be solved on the place.
The unit does not start:
-check that there is voltage at the wall socket;
-check that the unit is properly plugged.
The internal temperature is not cold enough:
-check that the unit is not placed too close to any heating source;
-check that the condenser is not blocked by dirt;
-check that behind the cabinet air can properly circulate;
-check the perfect closing of the sliding glass door;
The unit is noisy:
-check that all the bolts and nuts are properly fasten;
-check that the unit is placed on an even surface;
-check if any pipe or fan is in contact with any other part of the body.
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN
ACCORDANCE WITH EC DIRECTIVE 2002/96/EC
At the end of its working life, the product must not be disposed of as urban waste.
It must be taken to a special local authority differentiated waste collection centre or to a
dealer providing this service. Disposing of a household appliance separately avoids possible
negative consequences for the environment and health deriving from inappropriate disposal
and enables the constituent materials to be recovered to obtain significant savings in energy
and resources. As a reminder of the need to dispose of household appliances separately, the
product is marked with a crossed-out wheeled dustbin.
B
3
-12-
1
2