Publicité
A softener works as shown in the diagram here below:
Within the treating column
1
the softening resin
2
captures the ions Calcium
3
and Magnesium, res-
ponsible of the hardness,
exchanging them to So-
4
dium.
before sodium misses,
5
Supply voltage
Voltage
Consumption electrical
Minimum operating pressure
Maximum allowables pressure
Minimum flow rate required for good regeneration
Temperature of water
Temperature of room
SOFTENER WORKING PRINCIPLE
TECHNICAL FEATURES
Technical manual BWT PERLA PRO XXL - code P0011058 - Rev 10 - 23/11/2021
the electronic controller
triggers the regeneration of
with regenerant salt
stored within the salt tank
and mixed with water to
mono 230V 50/60 Hz
min.
max.
in operation
in regeneration
in dynamic
in static
to 2,5 at 9 m3/h
min.
max.
min.
Above freezing
max.
6
7
the resin
8
9
10
generate brine.
200 volts
250 volts
10 watts
50 watts
1,5 bar
7 bar
1°C
35°C
40°C
29
Publicité
