Publicité
iNSTALLATiON
installation
f Install the cable grommet in the back panel.
f
f Route the power cable through the appliance back panel.
f
f Position the appliance back panel over the screws and slide
f
the appliance back panel downwards.
f Secure the connection pipes and the supplied flat gaskets
f
onto the connectors.
f Align the appliance and tighten the fixing screws securely.
f
Making the electrical connection
Warning Risk of electrocution
Carry out all electrical connection and installation work
in accordance with relevant regulations.
Warning Electrocution
f Ensure that the appliance is earthed.
f
The connection to the power supply must be in the form
of a permanent connection in conjunction with the re-
movable cable grommet. Ensure the appliance can be
separated from the power supply by an isolator that dis-
connects all poles with at least 3 mm contact separation.
Material losses
!
Observe the type plate. The specified voltage must match
the mains voltage.
f Connect the power cable to the mains terminal (see chapter
f
„Specification / Wiring diagram").
10.1 Installation options
- Power supply from above on finished walls
- Water installation on finished walls
f Cleanly cut or break out the required entries in the appliance
f
back panel (for positions, see chapter „Specification / Dimen-
sions and connections"). If necessary, use a file.
Power supply from above on finished walls
f Cut an opening in the cable grommet suitable for the select-
f
ed power cable (for positions of the connections, see chapter
„Specification").
f Install the cable grommet in the back panel.
f
f Route the power cable through the appliance back panel.
f
www.stiebel-eltron.com
Water installation on finished walls
f Cleanly cut or break out the required entries in the appliance
f
back panel. If necessary, use a file.
f Guide the connectors through the openings in the appliance
f
back panel and fit them onto the appliance connection pipes
using flat gaskets.
f Fit the tap connection pipes onto the connectors using flat
f
gaskets.
10.2 Completing the installation
f Fit the appliance cover.
f
f Secure the appliance cover with the screw.
f
DHA 4-8 L |
7
Publicité
