Adding water
Fill tap water in the measuring beaker 11:
Water fill level
Power/steam control
6
1
2
Operation time
5 minutes
10 minutes
15 minutes
Pour the water into the water container 5 .
NOTES:
Do not fill above the MAX marking on the water
container 5 .
The water quantities with power settings
(1 and 2) and operation times are marked
on both sides of the measuring beaker 11
(fig . B, C) .
Adding oils/fine herbs/powder
(optional)
NOTES:
Ask your pharmacist or read the package leaflet
of the herbs and oil before adding the herbs and
oil .
Add a few drops of oil to a cotton wool pad .
Do not add the herbs and oil directly to the water
container 5 or aroma reservoir 1 4 .
If the nose steamer 2 is positioned on the aroma
reservoir 4 : Pull off the nose steamer 2 from
the aroma reservoir 4 first .
Measuring beaker 11
marking
1
2
Measuring beaker 11
marking
5 min
10 min
15 min
Take off the aroma reservoir lid 3 from the
aroma reservoir 1 4 . Grab the lugs of the
aroma reservoir lid, if necessary .
Add a little quantity of oils/fine herbs/powder to
a cotton wool pad .
Place the cotton wool pad on the inner ring of the
aroma reservoir 1 4 .
Place the aroma reservoir lid 3 into the aroma
reservoir 1 4 .
Face steamer
Place the face steamer 1 onto the base unit 8 :
Align the opening of the face steamer with the
power/steam control 6 .
Hold the base unit and turn the face steamer in a
clockwise direction until it locks into place .
Nose steamer
Put the nose steamer 2 onto the aroma reservoir
4 .
Place the aroma reservoir 4 onto the base unit
8 : Align the opening of the nose steamer with
the power/steam control 6 .
Hold the base unit 8 and turn the aroma
reservoir in a clockwise direction until it locks into
place .
Operation
NOTE: Do not operate the product without the
face steamer 1 or the nose steamer 2 .
m
WARNING! Risk of injury through
burning/scalding! During operation, do not
touch the water in the water container 5 . The
water is boiling .
Connect the power plug 9 with a socket outlet .
GB/IE/NI
11