Publicité
N ever touch the mains adapter
with moist or wet hands.
Unplug the mains adapter
the socket if the product will not be
used for an extended period (e.g.
whilst on holiday).
T he product becomes hot during
operation. Allow the product to
cool before you touch them.
T he product is only suited for use
with the included mains adapter
P lease note that the mains adapter
continues to draw a small amount of
power even if the product is turned off
as long as the mains adapter
plugged into a power outlet. To switch
the product off completely, unplug
the mains adapter
The LEDs are not replaceable.
If the LED fail at the end of their lives,
the entire product must be replaced.
Bringing into use
Q
Note: Remove all packaging materials
from the product.
N ever direct the LED light beam on
to reflective surfaces or at people
or animals. Failure to observe this
advice may result in eye injury and /
16 GB/IE
7
from
7
.
7
7
is
7
from the socket.
7
or loss of sight to people or animals.
Even a weak LED light beam can
cause eye damage.
P lace the product down with its
base
supported on a flat and
2
horizontal surface.
C onnect the DC plug
connector socket
I nsert the mains adapter
ordinary domestic mains outlet socket
(100–240 V ~ ).
U se the ON / OFF switch
switch the product on or off.
B end the flexible lamp arm
bring the product into the desired
position.
Note: Let the product cool down
before you touch it. Do not turn the
flexible lamp arm
about itself or the power cable
inside the product could be damaged.
Maintenance
Q
and cleaning
Note: The product requires no mainte-
nance. The LEDs cannot be replaced.
D o not use any solvents, petrol or
similar. This would cause damage
to the product.
to the
4
.
3
into an
7
to
5
to
1
completely
1
6
Publicité
