3. Select the next track with the
SKIP-) key and press the PROG(RAM) key again.
Repeat the procedure until all the desired tracks are
selected.
NOTE:
Once the storage capacity of the tracks to be
programmed has been reached, the memory preset
number „P01" appears in the display.
4. Press the
II PLAY/PAUSE key (21/6). The playback
starts. The selected track numbers are shown in the
display in the correct order and the symbol
or
MP3 and PROGRAM light up. Press this button
to pause briefl y the playback.
5. Press once the
STOP key to stop the playback while
retaining the program.
6. To resume the playback of the program press fi rst the
PROG(RAM) key once and then the
key.
7. To delete the program, press the
twice. The PROGRAM control lamp goes out.
The device stops automatically once the entire sequence
of programmed tracks is completed. The abbreviation
PROGRAM goes off and the programmed order of tracks
is deleted from the memory.
It is also possible to combine the programmed tracks
with the REPEAT function. After you have programmed
and started the device, please press the MODE button
(23/4) up to three times and then you can use the func-
tions as described under MODE".
Playing back Music in MP3 Format
With this device it is possible to play back pieces of mu-
sic in MP3 format. The device also supports all standard
CD types: CD, CD-RW, CD-R.
This machine of is able to play MP3 CDs. Up to 200 tracks
can be compressed and stored on these CDs. Your machi-
ne detects an MP3 CD automatically (the total number
of tracks and MP3s appears in the display). If you would
like to play one of these CDs, proceed as described under
„Playing CDs/MP3". Tracks can be programmed as descri-
bed under „Playing Back Programmed Tracks".
Please note:
There are a number of diff erent recording and compres-
sion methods, as well as quality diff erences between CDs
and self-recorded CDs.
Furthermore, the music industry does not adhere to fi xed
standards (copy protection).
For these reasons it is possible that in rare cases there are
problems with the playback of CDs and MP3 CDs. This is
not a malfunction of the device.
05-MC 4419 CD/MP3 AEG .indd 49
05-MC 4419 CD/MP3 AEG .indd 49
I / I
(SKIP+/
Cleaning and Maintenance
• Always remove the mains plug before cleaning the
machine.
• Any marks on the surface can be wiped off with a
slightly damp cloth without any additives.
Troubleshooting
Symptoms
CD can not be
DISC
played back.
CD jumps during
playback.
II PLAY/PAUSE
Technical Data
STOP key (20/5)
Model: ...............................................................MC 4419 CD/MP3
Power supply: ............................................................. 230 V, 50 Hz
Output rating: ........................................................... 100 W PMPO
Protection class: .............................................................................. ΙΙ
Net weight: .............................................................................. 4,3 kg
Radio section:
Frequency ranges: ............. UKW / FM 87,5 ~ 108,0 MHz
This device has been tested according to all relevant cur-
rent CE guidelines, such as electromagnetic compatibility
and low voltage directives, and has been constructed in
accordance with the latest safety regulations.
Subject to technical changes without prior notice!
Guarantee
The device supplied by our Company is covered by a
24 month guarantee starting on the date of purchase
(receipt).
During the life of the guarantee any fault of the device
or its accessories ascribable to material or manufacturing
defects will be eliminated free of charge by repairing or,
at our discretion, by replacing it. The guarantee services
do not entail an extension of the life of the guarantee
nor do they give rise to any right to a new guarantee!
Proof of the guarantee is provided by the proof of
purchase. Without proof of purchase no free replace-
ment or repair will be carried out.
If you wish to make a claim under the guarantee please
return the entire machine in the original packaging to
your dealer together with the receipt.
English
Course
Solution
CD is not inserted
Ensure that the
or inserted incor-
disc is inserted
rectly.
with the label
facing upwards.
Check the disc
Check the disc
for fi ngerprints,
for fi ngerprints,
dirt or scratches.
dirt or scratches.
................... MW / AM 531 ~ 1635 kHz
24.01.2008 15:27:11 Uhr
24.01.2008 15:27:11 Uhr
49