Publicité
Wi-Fi module management:
The Wi-Fi module can be switched on, turned off or reported in access point mode according to your needs.
To switch off the Wi-Fi module, press the
"F" key until the word WiFi appears on
the display.
To switch on the Wi-Fi module, press the
"F" key until the word WiFi appears on
the display.
To bring the Wi-Fi module back into
Access Point mode and ready to connect
to a Wi-Fi network, press the "F" key until
the word WiFi appears on the display.
Wi-Fi module status is shown on the display by a small icon on the right side.
Wi-Fi ON and CONNECTED TO A VALID NETWORK
Wi-Fi ON but NOT CONNECTED TO A NETWORK or
CONNECTED TO A NETWORK WITHOUT INTERNET
Wi-Fi ON and ready for the initial configuration
Wi-Fi OFF
Note: Af ter switching on the product, the connection to the Wi-Fi network and the App requires a 30" waiting
time at least. If the operation is not successf ul, the Wi-Fi symbol f lashes and the App shows the product as
disconnected. In this case it is necessary to switch of f the radiator f or at least 30 seconds bef ore trying again.
See paragraph 7 for troubleshooting of the most common problems and the explanation of the error
codes.
Press the "-" key to turn off the module.
Turning off the
correct execution of the command.
Press the "+" key to turn on the module.
Turning on the
correct execution of the command.
Press the "+" key for 3" to reset the
module.
The display of the word "AP" confirms the
restoration of the Access Point mode.
symbol light steady
symbol flashing
symbol flashing
symbol not visible
41
icon confirms the
icon confirms the
(
(
(
(
Publicité
